Ghost Immobiliser Installation
Guard your precious possessions from car thieves by adding an immobiliser ghost. Our TASSA-certified system is safe from hacking, key cloning and also vehicle immobiliser bypass.
The system is hidden in the wiring loom of your vehicle, so it's completely invisible to anyone who sees it. It operates by creating the pin code push sequence through buttons already present on the steering wheel doors, door cards, and the center console.
No circuit cuts
A car is a prized item that takes years of hard work to obtain, which is why owners want to safeguard their vehicle against theft. But, traditional security systems like wheel locks and alarms can easily be cut off or bypassed by thieves. A ghost immobiliser is a very effective and efficient solution that operates in silence and can't be recognized by modern day thieves.
Ghost immobilisers are hidden device that connects to your vehicle's CAN data network to disable the engine, without the use of radio frequencies or key fobs. It communicates with the ECU of your vehicle by using buttons on the steering wheel, dash and door panels. This creates an unique pincode only available to you. The code can be changed at any point and can be up to 20 digits in length, based on what you prefer. It also has an emergency code that you can use in the event of forgetting your PIN.
The ghost immobiliser can be used to stop relay boxes from transmitting your car key's signal from inside your home, which would unlock the doors and start the vehicle. It also blocks high-tech methods to steal your vehicle, like OBD port hacking. The device is small, weatherproof and hard to detect. It's also difficult to alter.
Another advantage of the ghost immobiliser is that it can be put inside your car without permanent marks. It is ideal for people who are planning to sell their car in the near future. It's also a lot faster and easier to install than a factory-fitted system.
The Autowatch Ghost, a cutting-edge new generation device, stops thefts of cars using contactless technology by connecting to the CAN network of a vehicle and using the buttons to generate a unique PIN code. This is a snoopy device that can be installed with no wires cut and does not require additional key fobs. It is also connected to the original ECU of the vehicle, preventing thieves bypassing it with a new key. This system is TASSA verified and can be linked to an International Security Register, allowing owners to have confidence that their vehicles are protected against theft.
No RF scanning
You will want to protect your vehicle from theft when you have spent lots of money and spent a lot of time customizing it. One way to do this is by installing an immobiliser. It will stop the engine from starting until you enter a unique PIN code. You can create a 20-digit pin by pressing the buttons on your dashboard or the steering wheel. This will ensure that only you are able to drive your vehicle. You can also set up a valet and service mode that allows you temporarily to start your car without entering the PIN code. This allows your technician to work on your vehicle without you being there. This is an excellent option for people who are looking to cut down on time and make their lives easier.
Ghost immobilisers, which are new generation device, connects to the CAN data network of your vehicle and uses the buttons on the dashboard and steering wheel to set a PIN number. It is designed to be discreet without any indicators or sounds to give it away and can be installed anywhere on your vehicle without impacting the look of your beloved vehicle.
This stealthy system is TASSA approved and can cut down on your insurance costs. It has a tracking function that will locate your vehicle even if it's gone missing. This is useful if you have a costly or rare vehicle that you've spent lots of time making it your own.
The Autowatch Ghost can be used together with an iPhone app to enable you to start your vehicle remotely in the event that you have forgotten your PIN or are unable to get into the vehicle for some reason. This feature is perfect when you need to do some errands, or pick up your kids and do not want to risk having someone else drive your car. It is also helpful if you need to take your vehicle to a mechanic for maintenance or repair.
Another advantage of the Ghost is that it doesn't transmit or detect radio frequency signals, making it undetectable to thieves who use RF scanning or code technology to capture codes. It can also safeguard your vehicle from key duplicates, ECU swapping and other common methods of car theft.
No key to cloning
Ghost immobilisers can be an excellent way to safeguard expensive cars and stop key cloning. ghost 2 immobiliser fitting near me stop your car from starting unless an additional PIN code is entered along with the regular key fob. This makes it very difficult for thieves to steal the vehicle, and may even stop them from trying. This is a good idea in the event that your vehicle has been extensively modified or is a rare model.
The immobilisers are connected to the vehicle's onboard CAN data network and are completely hidden which means there is no visible sign of its presence within the vehicle. It is also impossible for thieves to detect the device by using radio frequency scanning or code grabbing technology. This means that a criminal will have to spend longer in order to take your car.
A thief will need to be aware of the unique pin sequence and the exact location of the ghost in order to get around it. However, the pin code is specific to you and may be changed as many times as you'd like. The pin code is simple to remember, but mathematically unattainable for someone else to work out. The engineer will also provide an emergency pin number in case you forget the pin.
The Ghost CAN bus immobiliser is weatherproof and easily installed in any part of your vehicle. It works with all vehicles and is completely customizable to match the appearance of your car. It is also very affordable and simple to use. You can even transfer the device to another vehicle if you change vehicles in the course of ownership, providing that the new vehicle is compatible with it.
The CAN bus is compatible with other security features. It is able to, for instance detect damage to the vehicle and notify the owner. It can also shut off the engine if it detects that the vehicle is being manipulated. It also helps protect your vehicle from key cloning and hacking. It also detects vibrations and contact with the vehicle. Additionally, it will warn the owner if the vehicle has been moved.
No OBD port hacking
Ghost uses a hidden module that is connected to the CAN data network of your vehicle. This will stop thieves from hacking in to disable your alarm, deactivate your key fob, and make new keys. This technology is an improvement over the methods that were employed by thieves to steal vehicles in the past. The CAN data networks means that your system will not be affected when you disconnect or change your battery.
The Autowatch Ghost, the first non-detectable immobiliser for CAN bus worldwide, safeguards against key-cloning, hacking, and replica car theft. It does not utilize LED indicators or key fobs. Instead, it uses the buttons on your steering wheel, console and door panels.
Modern thieves employ diagnostics to detect circuit cuts in your vehicle. They are able to bypass immobilisers that require a lot of wiring or are integrated into the wiring. The Ghost is weatherproof and doesn't require any additional wiring. It is not able to be detected by professional diagnosis tools. It can be installed even on vehicles with anti-theft devices.
Another benefit of a Ghost immobiliser is that your vehicle is only able to be started by someone who has the PIN code and has physical access to your vehicle. This is a major benefit over traditional security systems that can be tampered with using simple cable tampering, a screwdriver or the use of an universal remote controller.
You can easily reset your PIN in case you forget it using the emergency PIN reset feature on mobile phones or computers. This is useful when you want to start your car when it's in a garage, or valet parking.
The Autowatch Ghost 2 has been accepted for insurance by TASSA and is able to be installed by our authorised installers. It comes with a QR fingerprint system for specific components to be identified, which will allow the return of stolen components in the event of their being discovered. It can also be switched into 'service mode' which allows the engine to start when the vehicle is in a garage or using valet parking however you will need to enter your PIN number to leave the vehicle.